Mitsubishi Electric Heat Pumps in Calgary & the Columbia Valley
Purcell Heating & Air installs and services Mitsubishi Electric ductless mini splits and Hyper-Heat heat pumps in Calgary and across BC’s Columbia Valley. Mitsubishi Electric is one of the best-known names in cold-climate heat pumps, with very quiet indoor units. We size every system and register your warranty within 90 days.
Why Choose Mitsubishi Electric?
Cold-Climate Heating
Hyper-Heat models are designed to keep heating in very cold weather.
Very Quiet Operation
Indoor units are among the quietest available.
Ductless Flexibility
Ideal for homes, suites and additions without ductwork.
Zoned Comfort
Set a different temperature in each room.
Smart Controls
Wi-Fi control and scheduling from your phone.
Our Mitsubishi Electric Products
Ductless Mini Splits (M-Series)
Single-zone wall units for bedrooms, basements, suites and additions. Quiet, efficient and installed without new ductwork.
Hyper-Heat (H2i) Heat Pumps
Cold-climate heat pumps designed to keep heating as temperatures drop. Our first choice when a heat pump will be a home's main heat source.
Multi-Zone Systems (MXZ)
One outdoor unit serving several indoor heads, each with its own temperature. Suits whole floors and larger homes.
Ducted Air Handlers and Zuba-Central
Ducted options that use your existing ductwork, including the cold-climate Zuba-Central system for whole-home comfort.
Installation Services for Calgary and Columbia Valley Homes
Personalized Consultation
We assess your home and recommend the right Mitsubishi Electric system and size.
Professional Installation
Licensed installation with correct refrigerant charge, drainage and snow-safe outdoor placement.
System Testing and Support
We test every system, show you how to use it and register your warranty.
Mitsubishi Electric System Replacement
Replacing an older ductless unit or baseboard heat? A new Mitsubishi Electric system runs quietly, keeps temperatures steady and can lower heating costs compared with electric baseboards. We remove the old equipment and recover the refrigerant properly.
Why Professional Installation Matters:

Get the most efficiency and lifespan from your system

Keep your Mitsubishi Electric warranty valid

Meet safety codes and permit requirements
Our Replacement Process:
We assess your current system and home
We remove old equipment and recover refrigerant
We install and commission your new system
We register your warranty and support you after installation
Frequently Asked Questions
Do Mitsubishi Electric heat pumps work in Calgary winters?
Yes. Mitsubishi Electric’s Hyper-Heat models are designed to keep heating efficiently in very cold weather. For Calgary’s deepest cold snaps, many homes keep a gas furnace as backup in a dual-fuel setup. We size the system and plan the backup with you.
What is the Mitsubishi Electric warranty?
Every system gets 5 years on parts and 7 on the compressor. Register within 90 days and it rises to 10 years on parts and compressor. Systems installed and registered by a Mitsubishi Electric Diamond Contractor get 12 years on most products. We register yours for you.
How much does a Mitsubishi mini split cost?
A single-zone Mitsubishi Electric mini split typically costs about $3,500 to $5,500 installed, with Hyper-Heat and multi-zone systems costing more. In the Columbia Valley, remote locations can add travel. These are typical market ranges; you get a written quote first.
Do I need ductwork for a Mitsubishi Electric system?
No. Most Mitsubishi Electric systems are ductless, so they suit homes, suites, additions and cabins without ducts. If you do have ductwork, a ducted air handler or Zuba-Central system can use it to heat and cool the whole home. Call us to book a free consultation.
Can a Mitsubishi heat pump replace my furnace?
In some homes, yes, especially well-insulated homes or in BC’s milder valleys. In Calgary, most homeowners keep the furnace as backup and let the heat pump handle mild days. We’ll explain the right setup for your home in writing. Call us to book a free consultation.
How long does installation take?
Most single-zone installations take one day. Multi-zone and ducted systems can take one to three days depending on the number of rooms and the electrical work. We plan the work to keep disruption to a minimum and tidy up when we’re done.
What maintenance do Mitsubishi Electric systems need?
Clean or rinse the indoor filters every month or two during heavy use, keep snow clear of the outdoor unit, and book a yearly professional service. Regular maintenance keeps the system efficient and helps protect your warranty coverage over the years.
Do you install Mitsubishi Electric in both Calgary and BC?
Yes. We install and service Mitsubishi Electric systems in Calgary and nearby Alberta towns, and in Windermere, Invermere, Fairmont, Radium and Panorama from our Columbia Valley office. Call (403) 312-9099 in Calgary or (250) 688-9222 in BC. Call us to book a free consultation.
What Our Customers Say
Take the Next Step to Comfort and Savings
Ready for a quieter, more efficient Mitsubishi Electric system? Call (403) 312-9099 in Calgary or (250) 688-9222 in the Columbia Valley for a free consultation and written quote.