Furnace Installation in Calgary
Purcell Heating & Air installs high-efficiency gas furnaces in Calgary homes, sized with a proper load calculation and installed to code with a City permit. Most Calgary furnace installations take one day and typically cost about $5,500 to $11,000, depending on the furnace type, venting and your home.
How trusted is our reputation?
How trusted is our reputation?
It’s the heartbeat of our company
Which Furnace Type Is Right for Your Calgary Home?
| Furnace type | Efficiency | Best for | Typical Calgary price (installed) |
|---|---|---|---|
| Single-stage | 95 to 96% AFUE | Smaller homes, tighter budgets | $5,500 to $7,000 |
| Two-stage | 96 to 97% AFUE | Most Calgary family homes | $6,600 to $8,500 |
| Modulating | up to 98% AFUE | Larger homes, quietest and most even heat | $9,500 to $11,000+ |
Prices are typical 2026 Calgary ranges based on rates published by Calgary HVAC companies. They aren’t Purcell quotes; your written price depends on your home and equipment. For a deeper comparison, read single-stage vs two-stage vs modulating furnaces and our furnace installation cost guide.
Furnace Installation Decision Guide Table
|
Factor
|
Consideration
|
Impact
|
Installation Benefit
|
Cost Implication
|
|---|---|---|---|---|
|
Home Heating Requirements
|
Square footage, insulation levels, and regional climate demands
|
Directly affects system sizing, efficiency needs, and comfort delivery
|
Properly sized system prevents short cycling and ensures whole-home comfort
|
Right-sized systems avoid 25-40% energy waste from improper capacity selection
|
|
Efficiency Priorities
|
Balance between upfront investment and long-term operating costs
|
Determines appropriate AFUE rating selection (90-98%)
|
High-efficiency systems deliver $300-$700 annual savings compared to standard models
|
Premium efficiency models typically represent 15-25% higher initial investment with 3-7 year payback periods
|
|
Existing Infrastructure
|
Current ductwork condition, electrical capacity, and venting requirements
|
Influences installation complexity and potential additional upgrades
|
Comprehensive assessment prevents mid-project surprises and ensures optimal performance
|
Infrastructure upgrades typically add $800-$2,500 to base installation costs
|
|
Air Quality Considerations
|
Household health concerns, allergies, and indoor air quality priorities
|
Affects filtration, humidification, and ventilation requirements
|
Integrated air quality solutions during installation prevent future retrofit costs
|
Air quality components typically add $500-$1,500 to system cost while delivering substantial health benefits
|
The Financial and Comfort Benefits of Professional Furnace Installation
Key Benefits of Expert Furnace Installation
Dramatic Efficiency Improvement
Lower gas use than older furnaces
Enhanced Comfort Delivery
Experience more consistent temperatures with multi-stage heating and advanced airflow management
Significant Noise Reduction
Quieter two-stage and modulating models
Smart Home Integration
Control your comfort from anywhere with advanced connectivity features
Improved Air Quality
Benefit from enhanced filtration, humidity management, and ventilation capabilities
Comprehensive Warranty Protection
Manufacturer warranties on registered equipment
Increased Property Value
Boost your home’s market appeal with high-efficiency heating credentials
Our 5-Step Furnace Installation Process
Comprehensive Home Assessment
Detailed evaluation of your home’s specific heating requirements, existing infrastructure, and comfort priorities to determine the ideal furnace installation strategy.
System Selection Consultation
System Selection Expert guidance on selecting the optimal furnace technology, capacity, and efficiency level based on your home’s architecture, your usage patterns, and your budget considerations.
Detailed Installation Plan
Careful planning of all removal, installation, electrical, gas line, and ductwork requirements with transparent pricing and clear timelines tailored to your schedule.
Precision Professional Installation
Meticulous installation of your new furnace by certified technicians, ensuring optimal performance, efficiency, safety compliance, and longevity.
Complete System Optimization
Thorough commissioning, testing, and calibration of your new system, including airflow balancing, control programming, and owner education to maximize your comfort and investment value.
Why Calgary homeowners choose Purcell Heating & Air
Columbia Valley and Southern Alberta residents trust us for furnace installation because
Climate-Specific Expertise
Systems selected specifically for our unique regional conditions
Comprehensive Home Analysis
In-depth assessment ensures proper system sizing
No-Pressure Consultations
Honest recommendations without sales tactics
Quality Installation Guarantee
Expert installation following manufacturer specifications
Code Compliance Assurance
All installations meet or exceed local building codes
Ongoing Support Commitment
Dedicated service after installation completion
Extended Warranty Options
Enhanced protection beyond standard coverage
Premium Brands We Install
Areas We Proudly Serve
Furnace Installation Options & Investment Value
Single-Stage Furnaces
Typical Calgary price about $5,500 to $7,000 installed. 95 to 96% AFUE, a good fit for smaller homes and tighter budgets.
Two-Stage Furnaces
Typical Calgary price about $6,600 to $8,500 installed. 96 to 97% AFUE, steadier heat and quieter running for most Calgary homes.
Modulating Furnaces
Typical Calgary price about $9,500 to $11,000+ installed. Up to 98% AFUE, with the most even heat and lowest gas use.
Available Financing Options
Financing is available on approved credit. Ask us for current terms.
Furnace Installation Value Analysis
|
System Type
|
Initial Investment
|
Annual Energy Savings
|
Comfort Features
|
Expected Lifespan
|
Available Rebates
|
|---|---|---|---|---|---|
|
Standard Efficiency (92-94% AFUE)
|
$4,500-$6,500
|
Basic temperature control, Single-stage operation
|
15-18 years
|
$1,000-$1,500
|
|
|
$6,500-$8,500
|
$500-$600
|
Enhanced temperature consistency, Two-stage operation
|
18-20 years
|
$1,500-$2,500
|
|
|
Premium Efficiency (96-98% AFUE)
|
$8,500-$12,000
|
$600-$700+
|
Precise comfort control, Variable-speed operation
|
20-25 years
|
$2,500-$3,500
|
|
Complete System Package
|
$9,000-$15,000
|
Integrated cooling, air quality, and smart controls
|
20-25 years
|
$3,000-$4,500
|
Frequently Asked Questions About Furnace Installation
How much does a new furnace cost in Calgary?
A new high-efficiency furnace in Calgary typically costs about $5,500 to $11,000 installed. Single-stage models sit at the low end, two-stage in the middle, and modulating at the top. Venting changes, ductwork and access also affect the price. You get a written quote after a free in-home assessment.
How long does furnace installation take?
Most furnace installations in Calgary are finished in one day. Jobs that need new venting, ductwork changes or electrical upgrades can take one to two days. We schedule around you and keep your home heated as much as possible on install day.
What size furnace do I need for my Calgary home?
It depends on your home’s heat loss, not just square footage. Insulation, windows, air tightness and layout all matter. We do a load calculation so the furnace isn’t oversized, which wastes gas and short-cycles, or undersized, which can’t keep up at −30°C.
Do I need a permit to install a furnace in Calgary?
Yes. Installing or replacing a gas furnace in Calgary requires a City of Calgary gas permit, and the work must be done by a licensed gas fitter. We pull the permit and arrange the inspection as part of every installation.
Is a new high-efficiency furnace worth it?
For most Calgary homes with a furnace over 15 years old, yes. Older furnaces often run at 60 to 80% efficiency; new ones are 95% or higher. You also get quieter, steadier heat, and two-stage or modulating models handle Calgary’s long heating season well.
What's the minimum efficiency for a new furnace in Canada?
New natural gas furnaces sold in Canada must be at least 95% AFUE. That means at least 95 cents of every gas dollar becomes heat in your home. Two-stage and modulating models typically reach 96 to 98%. Older furnaces often ran at 60 to 80%, which is why upgrades cut gas use.
Upgrade Your Home Heating System Today
Why Calgary Homeowners Choose Purcell for Furnace Installation
- Free in-home estimate: A technician visits, measures your home and gives you a written quote at no charge. No phone-only guesses, no obligation.
- Brands we install: Daikin, Mitsubishi, Goodman, Carrier and Amana, sized to your home with a proper heat-load calculation rather than a rule of thumb.
- Manufacturer warranty, registered for you: Every furnace carries its manufacturer parts warranty, which varies by brand and model. We register it on your behalf and explain the terms before you sign.
- Licensed gas fitters, City permits pulled: All gas work is done under Alberta gas ticket LGA 0209624, with the City of Calgary permit handled by us.
- Local since 2016: Founded and led by owner-technician Brent McQuade; 5.0-star rated on Google by Calgary homeowners.
